|
Time Change
Time Change Keypad Instructions
Before you start, you will need to know the master code for your system. A master code is the primary code required to make any changes to your system. Often the master code is the same as the keypad access code you use to arm and disarm your alarm system.
 Ademco, Honeywell, First Alert
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
|
|
Enter Master code _ _ _ _
Press # button
Press 63
Press * when the time/date is displayed. A cursor appears under the first digit of the hour. To move cursor ahead, press *. To go back, press #
Enter the 2-digit hour setting
Enter the 2-digit minute setting
Press 1 for PM or 0 for AM
Enter the 2-digit month setting
Enter the 2-digit day setting
Enter the last two digits of the current year
To exit, press * when the cursor is at the last digit, or wait 10 seconds |
DSC Classic Series (1550, 2550, 3000)
1.
2.
3.
4.
5.
6.
|
|
Press *6
Enter Mastercode
Press 1
Press 2-digit hour (24 hr format)
Press 2-digit Minutes (24 hr format)
Press # |
DSC Power Series (1555, 5010, 864, 1832, 1864, ENVOY)
1.
2.
3.
4.
5.
6.
7.
8.
9. |
|
Press *6
Enter 4 digit Master code (The red armed light will appear Keypad will enter program mode)
Press 1
Press 2-digit hour (24 hr format)
Press 2 digit Minutes (24 hr format)
Press 2 digit Month (March – 03)
Press 2 digit Day (01-31)
Press 2 digit Year (2007 – 07)
Press ## |
Please note: On the DSC Systems, the time will sometimes take a few minutes to update, if the time does not change after 5 minutes repeat steps.
 
GE Simon Systems 1, 2, and 3
1.
2.
3.
4.
5.
6.
7.
|
|
Open Panel (cover on keypad)
Enter Master code with red lettered numbers
Press (Clock Set) Button
Press (Hours) button to desired time
Press (Minutes) Button to desired time
Press Done
Close Panel |
GE Allegro
1.
2.
3.
4.
5.
6.
7.
8. |
|
Press 8 (Settings)
Enter Master Code
Scroll down (using Disarm Button) until TIME is displayed
Press # (Select)
Enter Current Time using 12-hour clock (eg. 1:05 pm needs to be entered as 0105)
Press arm to toggle between AM and PM
Press # to Accept
Press * until EXIT is displayed, and press # to confirm |
VISONIC PowerMax (Gemini)
1.
2.
3.
4.
5.
6.
7.
8. |
|
Press NEXT until User Settings Displays
Press SHOW/OK
Enter Master Code
Press NEXT until [TIME HH,MM A] Appears
Press SHOW/OK
Enter The Hours and Minutes, for AM press *, for PM press #
Press SHOW/OK
Press AWAY and then SHOW/OK to Exit |
|